Rangecast FAQ
[FAQ-1220] Error message: SLOW CONTROL LOOP (Code 15)


Page Type: SYMPTOM


OVERVIEW

Slow Control Loop means the Rangecast's software is running more slowly than is normal, which may result in slow response to such events as the start and end of transmissions, and therefore recordings that do not start or stop at the correct times. This is likely due to some software or process on the PC that is overloading its resources.


METHOD

It is recommended that Windows Task Manager be used to observe PC performance, and to determine what software or process is overloading the PCs resources.


Rangecast FAQ - ID 1220 - last updated 01 June 2018     Images shown - [block]